What do tweeters hook up to

But, it might not give you the whole enjoy. So, you can install additional tweeters by doing flush or bottom mounting. Finally, comes to the dash location which I like most.

Because no holes are compulsory and it comes with inbuilt factory tweeters. The tweeters placed in the dash and you can also perform bottom mounting.

After considering ideal location, let us now start with the wiring and connecting process. If you have made all the points as mentioned earlier correctly, then it will not take the time to connect tweeters to the speakers. You have completed the wiring. After wiring, you have to place the woofer and tweeters in the same location mounting location by maintaining distance.

And in this way, your tweeters are ready to with the speakers. Now let see the working process of tweeters.

When we add a crossover to the speaker, it passes high-frequency tune to the tweeter and low-frequency tunes to the woofer. As a result, the tweeter and woofer generate a better stereo system, and it compensates with the speaker sound. Thus it feels like, all the sounds are coming from the speakers with beat and bass. So, here we have arrived at the end of our topic. Though the discussion is about how to install tweeters in a car, you have got a full guideline about tweeters, I assume.

First, drill a hole into the door panel that is almost exactly as wide as the tweeter. Then, slide the base cup which holds the tweeter in place into the hole so that it is snugly secure in the panel. Finally, attach the tweeter to the base cup. Refer to the instructions that came with your base cup to see how precisely to attach the tweeter to it.

Most cups simply require you to pop the tweeter into it, while others may have you use a screw to attach it. Ideally, you should drill into the door panel after it has been removed from the door itself to avoid inadvertently damaging anything behind the panel.

If your door panel has an existing speaker grille in place, this is the best location for your tweeter. However, if there's no grille on your car door, then feel free to install your tweeter wherever you want high-frequency sound to come from!

Opt for a surface mount if you can't put the tweeter anywhere else. Use a power drill to drill a small hole in your car's speaker grille; this will be the hole that you'll stick the speaker wires through to wire your tweeter to the crossover. Then, use a screwdriver to screw the base cup into the grille with a pair of screws. Then, attach the tweeter to the base cup by sliding it in so that it's snugly secure inside the cup.

Avoid drilling the hole in the grille to deep, as you may cause unwanted damage to the speaker system. You only need to create an opening in the grille just big enough for speaker wires to pass through. Surface mounting is a useful installation method for when there aren't a lot of deep places in your car where you can drill new holes for installing tweeters. Part 2. Locate the crossover in your car. The stereo system in your car has a built-in crossover that filters the different frequencies that come through your speakers.

Crossover locations vary based on different car models, so you'll need to look in your owner's manual to find your crossover's specific location.

Most stereo crossovers are located inside the car door panel. Connect the speaker wires to the crossover. Finally, screw the caps back onto the binding posts to secure the wires in place. In most cases, the wire with the stripe is the negative wire and the wire with the solid color is the positive wire. Attach the speaker wires to your tweeter. Unscrew the caps on the binding posts on the back of your tweeter and insert speaker wires into the exposed holes.

Screw the caps back onto the posts to secure the wires. Again, make sure you connect the positive and negative wires to their respective binding posts to ensure that the tweeter works correctly. This blog might assist you as a self-engineering handy guide and solve all your queries that come to your mind unquestionably. I am also sharing various indispensable tips regarding the most delicate position to set Tweeters in your elegant car. Concentrates on the article for your upcoming inclusive stereo system for pure satisfaction and entirely enjoyable music.

You have previously known that Tweeter and woofer both can work jointly. Yes, they also might be hooked up to the same Amp.

I would suggest you use a passive crossover to get better sound quality. Balancing the ideal frequencies between Tweeter or Woofer thus improves the precision of music. You have to detach the subwoofer from the Amp with a screwdriver or a knife first. At this instant, cut down three lengths of speaker wire. Two of them are long that approximately so can arrive at among the Tweeter and the Woofer. The rest might be nearly six inches long. The wire of the Tweeter units of two coupled wires.

One will have a black or red stripe or similar marking, and another one might be a white marking. Place these wires in the positive and negative terminals.

Put the black, red, or other colored wire in the negative terminal and put the white wire in the negative terminal. As usual, put the wires in the positive terminal and negative terminal simultaneously. This will be the speaker wires that were originally connected to your car's stock speakers.

Be sure to connect negative leads together and positives leads together. Connect the crossover's high frequency leads to the tweeter's speaker wire terminals in the back of the tweeter. Be sure to connect positive leads to positive and negative to negative as you did with the crossover. Connect the crossover's low frequency leads to the speaker's terminals located in the back of the speaker.